CermaGuard Metal Treatment Dosage

Engines- STM-3™ is a  totally inert product that does not mix with lubricants. It's purpose is to impregnate the metal surfaces of the engine without affecting the very important criteria that the engine builders and lube manufacturers have in place such as  - oil viscosity and critical clearances between moving parts. STM-3™ will NOT affect oil viscosity or factory clearances. Engines treated with STM-3™  can be machined safely. STM-3™ unique ceramic lubrication catalyst dissipates heat and will create a near perfect cylinder seal resulting in noticable horsepower and torque increases. Protect your investment and WIN !!

Gasoline

1&2 cylinder -  add 2 capfuls of STM-3™

4 -8 cylinder - add 2 oz. (59 ml) of STM-3™

10 cylinder and up - or very high output may use an extra 1 oz. (29 ml) of STM-3™

Please note: more STM-3™ is not always better.Only use the extra 1 oz. (29 ml) for very large displacement engines. 

Transmissions - Automatic: add 1 oz. (29 ml) STM-3™.  Standard: add minimum of 2 oz.(59 ml) to a maximum of 16 oz. (473 ml)

Differentials & Transfer cases - add minimum of 2 oz.(59ml) to a maximum of 16 oz. (473 ml)

Power Steering - add 1 oz. (29 ml) of STM-3™

2 cycle - Add 2 capfuls of STM-3™ directly into fuel tank of engine being treated initially, and then add 1 capful of STM-3™  to every gallon (3.75 liters) of fuel used after initial treatment. NOTE: STM-3™ does NOT replace your 2 cycle oil !!!  It treats the metal to create a ceramic engine and is not an oil repacement. 

Click to Purchase Below: